OpenID Connect Authentication

Warning

Current support is experimental and may not cater for all possible configurations or environments.

Canopy supports the Authentication Code Grant flow of OpenID Connect (OIDC) as specified in the OpenID Connect core v1.0 specification (https://openid.net/specs/openid-connect-core-1_0.html).

and the Client Credentials Grant flow as defined in Oauth 2.0 where access tokens are JWTs with the required claims. (https://tools.ietf.org/html/rfc6749#section-1.3.4)

This allows both users and other software to be granted access to Canopy via an OpenID Provider.

User provisioning is enabled by default and claims are mapped to user attribute will result in those attributes being updated.

Important Information

The Authentication Code Grant flow can only be used to create a normal cookie based session at this stage and token refreshing is not available.

As such the session timeout should be aligned with the access token lifetime.

Client Credential Grant flow can be used by other software that needs to integrate with Canopy. The access tokens presented by such software must be valid JWTs with all the required claims.

Warning

The email attribute (via a claim mapping) is required for both flows.

Gloassary

Word

Description

OIDC

OpenID Connect

OP

OpenID Provider

Role

Claim

Attribute

Basic Configuration

Each OpenID Connect provider will require a slightly different configuration but the following entries will often be required.

All the required configuration is done in /etc/canopy/canopy.ini and a restart of services is required for any change to take effect.

Required settings (customise values as required):

  • OIDC_ENABLE=true

  • OIDC_OP_AUTHORIZATION_ENDPOINT=https://OP_HOST/adfs/oauth2/authorize/

  • OIDC_OP_TOKEN_ENDPOINT=https://OP_HOST/adfs/oauth2/token/

  • OIDC_OP_USER_ENDPOINT=https://OP_HOST/adfs/userinfo # only required when OIDC_FETCH_USERINFO=true

  • OIDC_RP_CLIENT_ID=your_client_id

  • OIDC_RP_CLIENT_SECRET=your_client_secret or OIDC_RP_CLIENT_ASSERTION_PEM=/path/to/cert.pem

  • OIDC_ATTRIBUTE_MAPPING=name=unique_name,email=email

  • OIDC_OP_JWKS_ENDPOINT=https://ADFS_HOST/adfs/discovery/keys # By default RS256 is used

Settings that are often required:

  • OIDC_FETCH_USERINFO=false # When claims are sent via id_token/access_token

  • OIDC_RP_SIGN_ALGO=RS256 # ADFS

  • OIDC_SSO_NAME=Our SSO

  • SSO_USER_ROLE_MAPPING=Analysts=analysts

During initial configuration it would also be usefull to increase the log level related to OIDC configuration:

LOG_LEVEL_OIDC=DEBUG

Warning

This setting may log sensitive information and should not be used in production except to debug specific issues for a limited time period.

Claim/Attribute Mapping

The OIDC_ATTRIBUTE_MAPPING controls how claims in tokens are mapped to user attributes. Its value is a comma delimited list of attribute / claim pairs.

OIDC_ATTRIBUTE_MAPPING=name=unique_name,email=email

maps the unique_name claim to the user attribute name and the email claim to the email attribute.

Only mapped claims are evaluated and at least the email attribute must be mapped to a claim that is the user’s email address.

Role assignment

There are two ways user roles can be assigned via claims in tokens:
  • List claim that contains the complete role list

  • Claim per role

Both approaches form part of the OIDC_ATTRIBUTE_MAPPING setting and can be used in combination (must be in the above order as set_role overrides any role mapping before it).

List claim

User roles can be sent via a list claim, the user’s roles will be reset to this list. If the complete list of user roles cannot be sent via a single list claim then per role claims will be required, possibly in addition to this.

The list roles attribute needs to be mapped to the set_roles field.

OIDC_ATTRIBUTE_MAP=name=unique_name,email=email,set_roles=groups

in the above example the groups claim is mapped to the set_role attribute.

Role name translation

Since the role names may not always match what Canopy expects, one can translate role names being sent via a list attribute using the SSO_USER_ROLE_MAPPING setting.

The mapping is a comma delimited list of OP Role Name = Canopy Role Name

SSO_USER_ROLE_MAPPING=OPRoleName=canopy_role_name1, OPRoleName2=canopy_role_name2

This setting will apply role translation to all SSO methods.

Supported Roles
All builtin and custom roles are supported, the builtin list of roles is:
  • admin

  • technical-managers

  • senior-analysts

  • analysts

  • schedulers

  • sales-managers

  • account-managers

  • kb-admins

  • pr-reviewers

  • qa-reviewers

For custom roles their name will be used which is case sensitive.

Claim per role

Assigning roles based on claims is optional and not all flags need to be mapped. Unmapped flags can be managed via the Canopy admin interface. The attribute value should be any string value to signify membership, except for the following strings, which denote the removal of the role: ‘’ (Empty string), ‘no’, ‘false’ and ‘0’.

If the attribute is missing then no adjustment will occur.

Role fields currently supported:
  • is_admin

  • is_technical_managers

  • is_senior_analysts

  • is_analysts

  • is_schedulers

  • is_sales_managers

  • is_account_managers

  • is_custom_pr_reviewers

  • is_custom_qa_reviewers

OIDC_ATTRIBUTE_MAP=email=email, name=name, is_admin=oidc_admin_claim

if per attribute role mappings are in use with list claim role mapping then the role flags should be after the set_roles mapping.

OIDC_ATTRIBUTE_MAP=email=email, name=name, set_roles=roles_claim, is_admin=admin_claim

Note

Per role claims do not support custom roles.

How to configure Microsoft Azure AD

Step 1

Log into Azure portal and navigate to the “Azure AD” section. In this section select the “App Registrations” subsection and create a new registration for Canopy.

Set the Redirect URI to https://<YOUR_CANOPY_URL>/oidc/callback/

../_images/azure_ad_app_registration.png

Step 2

Next goto the “Certificates and secrets” subsection and create a new secret.

Take note of the secret value field, it will be used with the OIDC_RP_CLIENT_SECRET setting.

../_images/azure_ad_client_secret.png

Step 3

Navigate back to the “Overview” section and take note of the Application (client) ID and Directory (tenant) ID identifiers. Application (client) ID identifier will be used as the OIDC_RP_CLIENT_ID setting and Directory (tenant) ID identifier will be used inside of the endpoint URLs (See example config)

../_images/azure_ad_client_id.png

Step 4

Copy the example config lines below to your /etc/canopy/canopy.ini file. You will need to replace all the values inside the angle brackets with the values you recorded in the previous steps.

Restart the Canopy service via systemctl restart canopy and attempt to login via SSO.

There will likely be attribute mapping issues as you start to map user fields and groups. These issues can be debugged using the LOG_LEVEL_OIDC=DEBUG setting and by viewing the Canopy logs journalctl -u canopy -e

Example Microsoft Azure AD Configuration

OIDC_ENABLE=true
OIDC_SSO_NAME=AZURE AD
OIDC_RP_CLIENT_ID=<APPLICATION (CLIENT) ID>
OIDC_RP_CLIENT_SECRET=<SECRET VALUE>

OIDC_OP_JWKS_ENDPOINT=https://login.microsoftonline.com/common/discovery/keys
OIDC_OP_AUTHORIZATION_ENDPOINT=https://login.microsoftonline.com/<DIRECTORY(TENANT) ID>/oauth2/authorize
OIDC_OP_TOKEN_ENDPOINT=https://login.microsoftonline.com/<DIRECTORY(TENANT) ID>/oauth2/token
OIDC_OP_USER_ENDPOINT=https://login.microsoftonline.com/common/openid/userinfo

OIDC_FETCH_USERINFO=true
OIDC_RP_SCOPES=openid profile
OIDC_ATTRIBUTE_MAPPING=name=name,email=unique_name

#Remove after testing
LOG_LEVEL_OIDC=DEBUG

How to configure Windows ADFS 2016

Step 1

From the ADFS Management console, in the Application Groups section, create a new Application Group of type*Server Application accessing a web API*.

../_images/step1.png

Step 2

Add the Canopy callback URL, it is https://CANOPY_HOST/oidc/callback/ Copy the generated Client Identified, it is your OIDC_RP_CLIENT_ID

../_images/step2.png

Step 3

Generate a shared secret and copy it also, it is your OIDC_RP_CLIENT_SECRET

../_images/step3.png

Step 4

For the Web API identifier, please use the Client Identifier from step 1.

../_images/step4.png

Step 5

Select who should be allowed to authenticate.

Step 6

Ensure the openid and allatclaims scopes are selected.

../_images/step6.png

Step 7

Review the summary, ensure that the identifiers are the same and that the callback URL is correct.

../_images/step7.png

Step 8

After completion of the Add Application Group Wizard, double click on the Web API and goto the Issuance Transform Rules and add a rule to send LDAP attributes as claims.

Configure atleast an email claim.

../_images/step8.png

Debugging

If your ADFS present any kind of error you can consult the Event Viewer to see why.

../_images/eventviewer.png

Example Windows ADFS 2016 Configuration

OIDC_ENABLE=true
OIDC_RP_SCOPES=openid email profile allatclaims
OIDC_RESPONSE_MODE=form_post
OIDC_RP_CLIENT_ID=your_client_id
OIDC_RP_CLIENT_SECRET=your_client_secret
OIDC_OP_AUTHORIZATION_ENDPOINT=https://ADFS_HOST/adfs/oauth2/authorize/
OIDC_OP_TOKEN_ENDPOINT=https://ADFS_HOST/adfs/oauth2/token/
OIDC_OP_JWKS_ENDPOINT=https://ADFS_HOST/adfs/discovery/keys
OIDC_FETCH_USERINFO=false

OIDC_ATTRIBUTE_MAPPING=name=unique_name,email=email,set_roles=groups
SSO_USER_ROLE_MAPPING=ADFSGroup1=CanopyRole1

Example Okta Configuration

OIDC_ENABLE=true
OIDC_RP_CLIENT_ID=your_client_id
OIDC_RP_CLIENT_SECRET=your_client_secret
OIDC_OP_AUTHORIZATION_ENDPOINT=https://YOUR_BASE_URL.okta.com/oauth2/default/v1/authorize
OIDC_OP_TOKEN_ENDPOINT=https://YOUR_BASE_URL.okta.com/oauth2/default/v1/token
OIDC_OP_USER_ENDPOINT=https://YOUR_BASE_URL_okta.com/oauth2/default/v1/userinfo
OIDC_OP_JWKS_ENDPOINT=https://YOUR_BASE_URL.okta.com/oauth2/default/v1/keys
OIDC_FETCH_USERINFO=true

OIDC_ATTRIBUTE_MAPPING=name=name,email=email,set_roles=groups
SSO_USER_ROLE_MAPPING=OKTAGROUP1=CanopyRole1

Configuration Options

Settings

Description

Default

OIDC_ENABLE

Enable OIDC authentication

false

OIDC_CREATE_USER

Create non-existent users

true

OIDC_RP_CLIENT_ID

Client Identifier of Relying Party

OIDC_RP_CLIENT_SECRET

Client Secret of Relying Party. This or OIDC_RP_CLIENT_ASSERTION_PEM must be set.

OIDC_RP_CLIENT_ASSERTION_PEM

Client certificate path/filename for urn:ietf:params:oauth:client-assertion-type:jwt-bearer client assertion. PEM format contaning atleast the client certificate and private key. This file will be re-read for each SSO attempt. Cannot be used in conjunction with OIDC_RP_CLIENT_SECRET

OIDC_OP_AUTHORIZATION_ENDPOINT

URL of OIDC authorization endpoint

OIDC_OP_TOKEN_ENDPOINT

URL of OIDC token endpoint

OIDC_OP_USER_ENDPOINT

URL of OIDC userinfo endpoint

OIDC_OP_JWKS_ENDPOINT

URL of OIDC jwks endpoint

OIDC_RP_SIGN_ALGO

Algorithm with witch tokens are signed: RS256 or HS256

RS256

OIDC_RP_IDP_SIGN_KEY

Signing key for HS256 algorithm

OIDC_VERIFY_SSL

Verify TLS certification during back channel communication with OP

true

OIDC_TIMEOUT

Timeout for back channel communication with OP

OIDC_PROXY

Proxy to use for back channel communication with OP

OIDC_RP_SCOPES

Scopes to request. openid is required.

openid email profile

OIDC_SSO_NAME

Name to display for SSO login on login screens

OpenID Connect

OIDC_FETCH_USERINFO

Should userinfo endpoint be queried for additional claims, required for opaque access tokens.

false

OIDC_MERGE_ALL_CLAIMS

Should claims contained in all JWT tokens be merged

true

OIDC_VERIFY_ACCESS_TOKEN

Should access token be verified (As JWT or via userinfo endpoint)

true

OIDC_JWKS_CACHE_TIMEOUT

Timeout in seconds of JWKS key cache

3600

OIDC_RESPONSE_MODE

Response type used by OP when calling Canopy’s callback URL.

OIDC_AUTH_REQUEST_EXTRA_PARAMS

Additional paramaters to set in authentication request. Comma separated list of key=value pairs. e.g. “resource=MY_RESOURCE_NAME” for MS-OAPX/MS-OIDCE

OIDC_ATTRIBUTE_MAPPING

Mapping of claims to user attributes

email=email

Debugging

All the required information to debug OIDC interaction will be logged under the Canopy process when the LOG_LEVEL_OIDC is set to DEBUG.

In /etc/canopy/canopy.ini set:

LOG_LEVEL_OIDC=DEBUG

restart Canopy service and attempt a login.

Consult Canopy logs for information regarding the login process, claim to attribute mapping and role mapping.

journalctl -u canopy -e